Staying busy . . .

I've been staying VERY busy, which is how I prefer things, really, but so much is going on right now, I can hardly catch my breath!  Let's see, where to begin . . .

My life-size bronze of "Nanning 374: Spirit of the Friesian" was unveiled on June 23, 2012.  Over 100 people were there, including the head of the Friesian association in The Netherlands!  He came over just for the unveiling!  He told my client that this piece is "historic, and really portrays the spirit, fire and passion of the Friesian horse."  COOL!  This life-size is only the second one in the world - the other is a standing pose and located in The Netherlands.

That's me with my actually bigger-than-life-sized bronze (I told the enlarging place and the foundry, "do NOT let him end up under 17 hands!" and they made sure he didn't!  He's about 18.2 hands as he stands and if he stood straight instead of crouching as he is here, he'd be probably 19.2 - not UNDER 17 hands, for sure!).  This piece is located at Fenway Farms, Hortonville WI.  It's a private farm but visitors are welcome by appointment.

After that, I got busy with some advertising, show entries and contests.  One contest resulted in the life-size being included in an online arts magazine, "Art and Beyond."  Another contest resulted in a color ad and a feature story - and I DIDN'T win the contest!  That's a great result for an entry that didn't win!  An ad I placed in another magazine caught the eye of the editor, which resulted in a feature story on me and the life-size.  So watch for the October issues of "Riding" magazine and "Horseman's Corral" - those are the two that are doing stories as well as the ads.  Yay!

I currently have three bronzes (shown below: "Just Trying to Help," "Frolic" and "Windswept") in "An Equine Jubilee" at the Delaware Arts Castle in Delaware OH.  The show runs through Oct. 24.   It's a nice show with lots of good work!  Go see it if you can!  And be sure to check out the gift shop while you're there - they're carrying my jewelry!

"Nanning 374: Spirit of the Friesian" was accepted to the American Academy of Equine Art's Fall Open Juried Exhibition, which will be held in the Scott County Arts and Cultural Center in Georgetown KY.  The show opens to the public September 15 and closes October 24.

I've been working on a relief of a pony I saw a picture of on Facebook.  The photo was lovely as is the pony, so I asked the owner if I could sculpt it.  She and the photographer both gave me enthusiastic permission.  One of the reasons I chose the photo is that the angle of the photo presents a very difficult challenge for sculpting a relief.  It's a head-on shot that shows the rest of the pony's body, all the way back to her rump.  That kind of foreshortening is very hard to sculpt, but I did it!  I just "declared a victory" on her today (translation:  I decided there's nothing else I can do to it, so I wrote my resin caster to find out what it's going to cost me to cast her).  Here she is.  I call the piece "Enchanting."

On the writing front, I wrote a short story (1200 words) and read it at the Western Ohio Writer's Association's Beatnik Cafe in Xenia the first part of August.  It was held at Blue Jacket Books in Xenia as part of their "Firs Friday" activities.  A good group of folks turned up to hear six or seven of us read our stories.  It was nice to hear  a good reaction from the audience for mine.  I wrote a fictionalized version of my aunt and uncle meeting for the first time.  I don't know how they met, honestly, but I used their personalities for the lead characters and the story turned out well.  I'll be sending a copy to my aunt for her to enjoy (she's a poet - writing runs in the family).

A story of mine,"Lisa Goodman, Writer," was accepted to an anthology that will be published this fall.  This was my first ever "horror/suspense" story and I'm really pleased with how it turned out (it still give me goosebumps and I know what's happening in it!)  I'll post info here and on Facebook when the anthology is ready to sell.  I'll be happy to sell you an autographed copy of it!

I'm teaching a sculpting workshop Oct. 1-5 at Dancing Horse Farm, Lebanon OH.  The cost is $250 and the skills you will learn can be used to sculpt any kind of mammal, from cats to horses to humans.  Come join me!  We'll have a lot of fun.

I have a new commission I'm working on (which means "Levade" has been set aside for a while - paying work always comes first!).  I can't say much about it at the moment except that it's another gorgeous Friesian!   It should be fun to work on!

I'm always happy to read your comments as well as answering questions, so feel free to post them or email me if you wish.  I hope you're having an enjoyable summer.

 

How to Fix Photos for Your Art Website

I saw a question on LinkedIn where an artist didn't know how to use Photoshop to fix his pictures nor how to build a website.  I said it was easy to fix photos and it IS, so he wrote me and I wrote the following to help him out.  I figured it was worth sharing, so here ya go.

I have Photoshop Elements 6, which came with one of my computers years ago.  Hopefully my instructions will make sense to you when you use your own version.

Open a photo file.  If you need to crop it, go to the symbol on the left side (the toolbar) that looks like these two symbols crossed: <> so they make kind of a box inside them.  That's the crop tool.  Put your cursor at the top left corner of where you want to crop and drag it diagonally down the the bottom right corner of where you want to crop.  You can move the location of the crop box by moving a corner (there will be a small box in the corner you can grab and move).  If a green check mark shows up, click that when you're happy with how you're cropping it.  If the green check mark doesn't show up (different versions do different things, y'know), go up to the "Image" word on the top tool bar and click that.  A drop down list will show up.  Click "crop" and then your picture will be cropped.  If you don't like how it turned out, go to the top bar and click "Edit" then choose "undo" from the drop down list.

Once you have your photo cropped, go to the Enhance tab on the top.  From the drop down list choose ""auto smart fix" which will brighten the image. If you think the colors were better before, go to "Edit" and hit "undo."  Go back to the "Enhance" tab and click "Auto sharpen" which will make your photo look more crisp.  Again, if you don't like it, go to "Edit" and hit "undo.

Now you're going to resize your photo to use on your website and other places.  Most photos are either 180 dpi or 300 dpi (dots per inch) when they come from a digital camera.  If you do use a digital camera, take your pictures as Large Format - that way you have plenty of "information" for the computer to use as you resize it. 

Once you've cropped it, save your original file with a name that lets you know it's the original:  "Pegasus bronze original cropped" perhaps with the date, too, so you can resize it differently in the future if you need to.

If you might be sending it to be used as a magazine cover or a postcard for a show, save it at 8x10 inches and 600 dpi.  If you will be using it in a magazine ad inside the magazine or perhaps in a book, save it at 8x10" and 300 dpi (these are industry standard dpi for advertising and magazine or book ads or copy).  Mark each file as you save it with all the information you need:  "Pegasus bronze 8x10 600dpi"  that kind of thing. 

For your website, resize the photos to be no more than 6" on the longest side and save them at 72dpi.  If this looks too grainy to you, save it at 100 to 120 and see how you like those.  Those are all low enough dpi that they can't be easily stolen by someone wanting to make cross stitch patterns with your painting, for instance.  Save the photo as "Pegasus bronze 6 in 72dpi" so you can find it easily when building your website.

If you want to - a lot of my painter and photographer friends do this - you can put a copyright watermark on the photo.  To do this, click the T (type tool) on the left tool bar, then set your cursor where you want the text box to start and drag diagonally until you're happy with it.  You can move it around after you finish typing, so it doesn't have to be perfectly placed at first. Once the box is in place, choose your font, something bold that will be easy to see like "Impact."  The font box is at the top of the window in the second row of tabs (it appears after you hit the "type tool").  Choose a large size (like 48) and a color that will be complimentary but still apparent on your picture.  There are a variety of grays that do a good job of this.  Also choose if you want it centered, left or right justified.

Now put your cursor inside the text box and if you want the copyright symbol, hold down the Alt key on your keyboard (it's near the space bar on a PC keyboard, dunno where it is on a Mac) and while holding it type "0169" - when you release the Alt key, the copyright symbol (c inside a circle) will appear.  Then type the rest of your copyright words (website, your name, whatever you want).

Once you have your copyright words typed, look at the toolbar on the second row above the window and you'll see a white box with a red line diagonally through it next to the word "style" - click that, and you'll see a choice of bevels to put on your words.  If you click the right fly-out arrow at the top of that box, you'll see the word "visibility" among others.  Choose this and then you can choose "hide" which allows only the embossing to show or "ghosted" which makes the color transparent.

Now you can move your watermark if you want to.  Put your cursor ABOVE the text box and slide it around the screen until you're happy with its placement.

Don't click SAVE or your photo will have that copyright on it forever and you won't have a "clean" version if you need it.  Instead, click "Save As" and give it a name like this:  "Pegasus bronze 6in 72dpi watermark" - something that clearly identifies it for you.

And that's all there is to it!  Don't worry about "layers" or any of the other things offered in Photoshop if all you're doing is fixing your photos to use on a website or in advertising. 

If you get stuck, go to your Internet search engine and type in "How do I add a watermark" (or whatever you need) "in Photoshop Elements 6" (or whatever you have).  There are YouTube videos that show step-by-step how to do pretty much anything you want.  Photoshop Elements 6 is such an old program, the videos are all for 7-9 or whatever number they're up to, but they have kept the basics the same to the point that you should be able to figure out what you need from the available videos.  I did the watermark part of this post by using a video that was made for Elements 7-9.

Get into Photoshop and just play with it.  You'll soon figure it out.  Just remember to save each changed photo with a unique name and don't overwrite your original!  Have fun with it.  Good luck!

New Works in Progress

I always work on something when I'm in a booth at a show.  At Equine Affaire, with four 10 hour days to be in my booth, I get a decent amount of work done while talking to folks.  Sculpting during a show is a great way to teach people about the process of creating sculpture.  This time, I also had a digital picture frame doing a slide show of the Nanning sculpture being digitally enlarged.  That gave me even more educational material to show the process of going from idea to finished  bronze.

All that said, I started a small sculpture of an Andalusian stallion doing a levade (a 45 degree rear that's held for a few  moments - part of "haute ecole" or "high school" dressage.  It takes incredible strength to hold that position).  Several years ago, I was allowed to photograph the spectacular Andalusian stallion Alborozo at his home in Malibu.  His owner, Avi Cohen, put him through all his paces and let me take all the photos I wanted which was incredibly kind and generous of him.

When I started this sculpture at Equine Affaire, it was nothing but pipe, a board and some spools of wire.  I made an armature (metal support for sculpture) and started adding clay, building him up and working on his muscle masses.  I haven't started work on his legs yet, as you can see in the pics below.  The tail is short like that because the horse's tail is tied up this way so he won't step on it while performing.

This is where he is now:

My second new work in progress is a relief of a lovely mare that's an Arab/Welsh cross.  She's a palomino with a wide blaze.  I saw her pic on Facebook (she belongs to an online friend of mine) and asked if I could sculpt it.  She agreed and I started on it, but life got in the way and I had to leave it unfinished for quite a while.  Now I'm back at work on it and it's an intriguing puzzle to solve.  It's a difficult angle to do as a relief, which is one of the reasons I wanted to try it (silly me!).  This is one of those things we self-taught artists do - find a new challenge and fight our way through it as a way of increasing our skills.  So this piece will go through some serious cases of "the uglies" before it becomes the beautiful piece I see in my head.  Anyway, here she is along with the photo that inspired me.  It'll get better, trust me!

Other aspects of the art biz

Most of the time, I write about the creative process.  There are other aspects to the art biz than applying clay to a pipe and wire armature, and I'm going to talk about that today.

My daughter's logo for her business, Dancing Horse Farm, Lebanon OH (where I'm the Marketing Director/Webmistress/Newsletter editor, which keeps me VERY busy!) is beautiful and seemed like a natural design for jewelry.  With her permission (it IS trademarked, so it required permission), I started trying to find a way to make it into jewelry.  I knew her clients would enjoy it as jewelry and I also thought it would be a good way to promote the farm.

As you can see, it's very graphic in nature.  In fact, it was created (by my friend and fellow artist Marcia Van Woert) digitally.  I tried to sculpt it in various ways but had little to no luck (and no, I have no "digital" skills at all when it comes to creating art).

While I was in Oregon last July having the maquette of Nanning 374 digitally enlarged to life-size (the bronze will be installed in April, YAY!), I saw their 3-D printer at work (not on my piece - that was done with a different process).  The 3-D printer takes a scan or a digital image and prints it out in three dimensions in resin.  That's pretty darned cool! 

I asked if they could make jewelry blanks for me from this image and they said "sure" - and so they did.  They were GORGEOUS!  I sent them to a pewter caster and learned they were too thin to use to create the molds.  Rats!  The pewter place's cadcam guy re-did them at the proper thickness and jewelry was "born"! 

Now design ideas are running out of both my ears, and my daughter's in the same condition, LOL!  So far, we have two styles of earrings with the logo 1/2" wide, 3/4" wide pendants and zipper pulls, and I'm making beaded bracelets using the 1/2" charms.  They're all so beautiful!  And since they're pewter, they're AFFORDABLE! 

(Shown above:  Ball earrings, french wire earrings - both with 1/2" charm; 3/4" pendant; zipper pull using 3/4" pendant.)

All of them say "myDHF.com" (the farm's website) on the back.  The earrings don't have the texture shown above on the back, but they do have the lettering.  They're available at an introductory price of $10 for either style of earrings (ball earrings or french wire), $10 for a pendant with your choice of chain length from 16" to 24", $12 for the zipper pull.  There's $3 shipping/handling within the USA.  You can order them by contacting me (I use Lynda@myDHF.com for DHF business) or directly from the website at www.myDHF.com/dhf-jewelry.html.

It's SO EXCITING to see something like this become a reality, especially after trying for so long (literally years!) to create it.  And it's wonderful to see the excitement of those who know and love Dancing Horse Farm when they see and wear the jewelry. 

I'll be selling this jewelry (along with my sculpture) at Equine Affaire in my booth (#529-530 in the Bricker Building at the Ohio Expo Center - state fairgrounds) April 12-15, but the prices will be higher.  The current prices are introductory only.  If you want some DHF jewelry and want to get the best price, order it soon!

I love learning about all the ways art can be produced.  Learning about 3-D printing and cadcam stuff is really interesting to me, although I'll never conquer doing them myself.  There are SO many techniques and technologies that didn't even exist when I was a young'un.  Being an artist is endlessly fascinating . . .

Yay!!!

I'm excited!  I wrote a "short story" (not so short - around 10,000 words) for the Western Ohio Writers' Association, where I'm a member.  Since I was trying to get it finished in time for the October meeting where members would be reading at Books & Co. in The Greene (in Beavercreek OH), I wrote a ghost story/horror/suspense kind of thing, not at all my usual genre (magical fantasy with a bit of romance involved).  I was very insecure about how it turned out.  Did I create enough suspense?  Did I withhold the clues long enough?  Did I give too much away?  Did the suspense build?  Did I manage to save the "surprise" until the end?

Well . . . I wasn't able to go to the October meeting, so I just kept working on the story because it intrigued me as a project.  Then I heard about an anthology project that sounded interesting.  I decided to polish that story and see if it would get in.  It was all I had since I normally write novels.  Imagine my surprise and pleasure to learn it was accepted to the anthology!  It will be published late this year.  I'll have ordering information both here and on my website when it's available!

The story is called "Lisa Goodman, Writer."  I've been given a detailed critique to help me rewrite it for publication.  And no, I can't tell you any more about it except it takes place in Dayton (which doesn't have a lot to do with the story - but that really is all I can tell you about it!  LOL).

So HUZZAH!!!!  My attempting a totally different genre wasn't a horrible failure (which I feared it might be!).  I'm a happy camper!

Busy, Busy, Busy!

I haven't posted in a while!  Sorry about that.  I've been busy building websites for my daughter's farm (I'm her marketing director) and also for myself.  I'm REALLY happy with how the sites I've built so far have turned out.  Mine aren't published yet, but you can see hers at www.myDHF.com

I've spent YEARS working on my websites in raw html - and now there are free sites with drag 'n' drop software that's so sophisticated, it's amazing!  I'm using Weebly.com to build these sites and their software allows slide shows and a bunch of things I'm not familiar with.  It was a bit daunting to figure out how to use the software to do what I had in mind, but once I understood it, I was off and running - and I'm still running, redoing my big art site now (which will take a while!)  But the end result is modern, clean and elegant, so I'm very happy with it!

I've recently published a Harry Potter ficlet, something very fluffy and fun.  You can read it on www.siye.co.uk or www.fanfiction.net - just search for "Abraxan" to find my stories.  The new one is "Stumbling Out of the Floo" and has already been nominated for two awards on SIYE!

I've also been playing with water clay, something I haven't done in years.  I had some ideas for small wall hangings I thought would be nice in terra cotta, so that's what I'm doing.  I've done a lion relief bust so far and have a horse relief in process.  Here's the lion - the horse doesn't look like anything yet.

The lion is 7 1/4" wide by 8" tall by 2 1/4" thick  He's on a round board with a Formica top - probably a cutout from a sink or something.  I wrapped the edges in duct tape to keep the particle board edges from shedding in the clay (yes, that's duct tape - it looks like it has paint splashes on it.  Got it at Walmart - they have quite a variety of duct tape there.)

I plan to try to cast this lion so I'll have an edition to sell, but I honestly have no idea how much they'll cost.  I'm trying to keep the costs as low as possible.  When I have the price figured, I'll post it.  In the meantime, how do you like him?

I'm spending the winter re-organizing and re-doing and so on, so I will soon have new websites, new jewelry to sell, and I'll be making a new brochure soon too.  Busy busy busy!

Marketing Your Art/Creating a "Brand"

Most artists are unaware that it takes about 50% of your time to market your art properly.  No agent, no gallery is going to market your art with passion and knowledge like yours (remember, they aren't working only for you!), so do it yourself and put that money you'd give an agent into your own advertising! 


As an artist, your name is your "brand name" unless you prefer promoting your studio's name.  Either way, it's a "brand" and that's a good way to think of it as you promote it. 

Building a "brand name" is a multi-pronged task.  You need a business card with an image of your work preferably on both sides (with some clear space left to write notes on if you need to - and all your contact info on one side).  ALWAYS carry a good supply of your cards with you.  I recently gave cards to a couple of people I was introduced to in church, when my friend included "She's a sculptor" in his introduction and then asked me to show his friend some pictures of my work.  Carrying cards is the first, simplest and one of the most important steps in marketing.  And try to always have at least some pictures with you, even if they're on your cell phone, as mine are (gotta love smart phones!).

You need brochures or fliers with pictures of your work - color, if possible (if I can afford it, I'm doing color next year!).  Don't do cheap-looking brochures (those printed on regular computer paper, for instance) or people won't consider your art to be worth much.  Use heavyweight, glossy or matte paper, but GOOD paper to make the best and most memorable impression.

You need a Website - not just a Facebook page.  People looking for artists don't look on Facebook, they search the Web.  Google won't find your art on Facebook, just your posts, but it will find your Website if you build the meta tags right! 

All your promotional materials - cards, brochures, website, etc. - need to be similar in style.  Perhaps you'll use your business logo on everything, or a picture of the same piece on the cover of each thing, so every piece of advertising, each hand-out, tells people this is YOUR work, without them even having to read your name.  If your work is elegant and refined, your Website and other materials should be elegant and refined.  If your work is more eclectic or funky or whatever, then your website and everything else should have the same feel.  You want to create a "presence" that's recognizable. 

Think of Nike and their "swoosh" - all you have to see is that "swoosh" and you know it's a Nike product, which tells you something about its quality, style and price without you even looking for that information because you know the brand.  Find a way to make your work that recognizable.  I can recognize a Kimberly Kelly Santini painting the instant I see it - her style is that unique (to my eye, anyway).  Same with Elin Pendleton,  Debbie Flood , Shary Akers and many other artists.

Create a unified presence with a real similarity in style or palette among your works.  My bronzes are COLORFUL because I want them to look like real horses.  I rarely  use the French brown patina people think of as "bronze" color - it's good for outdoor art because it's durable, but there are many more interesting choices for indoor sculptures.  I have my bronzes finished with translucent patinas so the metal glitters through just as a real horse's clean summer coat glitters metallically in the sun.  I haven't seen anyone else use such patinas on horses the way I do, and that's fine with me!  The few paintings I've done are bold-colored and look more like stained glass than realistic horses, and I like them that way.  If I ever produce paintings I think are worth selling, they will be bold and probably a bit stylized since I can't draw as well as I'd like to.  But they will fit in my "colorful" style.  (That's my "Frolic" show above.)

Stand back and look at your work.  There is a uniformity or a thread of continuity to it somehow - that's your style.  Find ways to emphasize that in all your advertising and in your booth setup.  For instance, I don't use black drapes for my table covers.  Mine are a slate blue and my carpet is light beige - it's a light, bright, elegant but cheerful booth.  Early in my career, I followed someone else's advice on how to make my booth elegant and used to use black drapes, but all the Friesians I do faded into the black when it was behind them, and I found that much black to be kind of overwhelming, so I went for contrast with the art, and lighter, pretty colors to keep me happy.

There are tons of books out on marketing your art.  Go buy at least one of them - preferably two or three so you can compare methods between them - and then do what they say!!  Do your own research and figure out what will work for you.  Nobody but NOBODY can sell your art like you can!  Believe it!

Finished and Mounted Maquette!

He's done and he's GORGEOUS!!  "Nanning 374: Spirit of the Friesian" comes mounted on a walnut base with a built-in turntable so you can turn him to any angle you wish without having to lift him up.  He's 15 1/2" long x 13 1/2" high at the top of the neck x 3 1/2" wide, not counting the base.  (I have those measurements here somewhere, but I've already shipped the finished ones out, so I'll have to remeasure if I can't find my note!  Argh, I'm so blond sometimes!!  LOL)


ANYway . . . he sells for $2250, 5% of which is a donation to the Fenway Foundation for Friesian Horses.  I do take payments at no interest, and it takes about 4 months for each one to be cast, so you have at least that long to pay for it.  I've taken payments as long as 3 years for some pieces, so let me know what will work for you.


Here he is in all his glory!

Maquette in metal!

The maquette (small version) of the life-size is in metal now!  It will be patinaed (black, of course!) on Monday and I'll have the first two in my hands sometime next week!  I have all the bases and name plates - the bronzes just need to be mounted.

I'm really excited about how GORGEOUS they are!  Wow!  It's SOOoooo cool when a piece comes out looking even better than you'd hoped!

Here are some pics the foundry sent me to approve the metal work.  Please don't drool on your keyboards!  LOL

BTW, you can order one of these for yourself - $2250, and a donation will be made to the Fenway Farm Friesian Foundation from each sale.  I take payments at no interest.  Email me at Abraxan@yahoo.com if you're interested.

Can't wait to see them in person!!

Digitally Enlarging the Maquette to Life-Size

Yes, I published this post in August.  I was going to send it to a friend and discovered the formatting had gone all wonky!  So I'm fixing it and re-publishing it.  The bronze is finished now and will be installed in April!  YAY!

* * * *

My life-size piece is being cast in bronze now. I can't wait to see it!! My husband and I went to Oregon for 9 days for me to work on the enlargement to make sure it was exactly the way I wanted it. My customer came out in the middle of the week to see it and make sure it was how he wanted it too. It passed both of our inspections by the end of the week! 

 The digital enlarging method ROCKS! First, the piece is scanned by a computer, then it's cut out by a 12' long 7-axis robotic arm (like the kind used in the auto industry), then clay is applied and ART happens! The scanner doesn't get into tight spots, so there was a curve that attached the testicles to the gaskins, instead of the line of separation that should've been there, but it was EASY to carve out the Styrofoam and touch up the area with additional clay. The horse's buttocks and tail created such a shadow, the scanner missed scanning the rectum completely, so I had to add that to the life-size, which again was no big deal. The enlarging place has a whole staff of people with degrees with  sculpting working on the piece along with me, my husband and even my customer (who said I was like Tom Sawyer, getting everyone to work on it, LOL!) 

 When you go from maquette to life-size, any tiny errors in the maquette will show up as large errors (the life-size in this case is 700 times bigger than the maquette). Thankfully, no errors showed up once it was enlarged except for one ear not being set quite as straight as I wanted it to be (on the maquette, it looked fine, so it really was a small error). With help from the crew (since I didn't know how to do it), I cut the Styrofoam ear off, put it at the angle I wanted, secured it with a pointed dowel rod, then squirted glue under the gap. It's a foaming kind of glue from a caulking gun, so it expands and fills gaps. It's also easy to carve or rasp off if it's in the way. The dowel was hammered farther into the foam so it would be easy to pull out, then removed. Voila! Perfect ears!! The scanner made the edges of the ears and nostrils too thick because of its inability to "see" sharp edges like that. No biggie. I carved them off with a bread knife, then built up the clay to what I wanted. 

Once the piece was fully assembled and all the finishing work done, it was cut into pieces to be sent to the foundry for casting. I worked from 8-5 for a week (and my shoulder didn't hurt much at all thanks to a cortisone shot the previous week!) It was hard work but I learned SO much!!!! And the piece is GORGEOUS! (Not just my humble opinion, either! LOL) The 12' long 7-axis robotic arm that's shown in the pictures can do a two day job in two hours! That's pretty darned amazing! You might notice in the following pictures that the edges of the hooves weren't as "crisp" as the edges of real hooves are. That was due to the way the machine cut them out. My customer fixed the hoof edges for me - I asked him to add that clay and he got it in really good shape himself before I came along and did the fine tuning.  He sure enjoyed himself, and he'll be able to point to certain parts on the bronze and be able to tell his friends that he did that!  I think that's great!  :) 

This was a FABULOUS experience for me!  I hope I get more life-size commissions so I can go through this process again!

Below you can see the robotic arm cutting out the head and neck - the horse's face is to the left and the back edge of his neck to the right. This is the same kind of Styrofoam used to insulate office buildings. It comes in 8" thick blocks.

The computer split the scan of the legs and tail in half lengthwise.  These parts are being cut out on this router table and will be glued together later.

Below is one of the master sculptors who works at the enlarging shop, working on the detailing of the mane. In the life-size, the details I put in the maquette's mane and tail weren't dynamic enough, so clay was added to make them a better size for the life-size. The sculptors there can do all the work for the original sculptor, either at their direction or without them even being there. Apparently I was unusual because I jumped right in and worked alongside them, which made sense to me - it's MY piece! My hands needed to be in every aspect of creating it!

 

Yeah, I'm happy with it! Awed by it, actually. It's amazing - and HUGE! Eight feet tall by 9 feet long without the cart it's mounted on at the moment.

I wish my parents were alive. It would be such a kick to be able to send this photo to them and say, "Look what I did!" :) I know they'd hang the picture on their fridge.

Taking Credit Cards

Changes to the rules of how credit card transactions are processed necessitated a change in the system I was using last fall.  The software I was using (PC Charge Pro from www.verifone.com) had been  made obsolete by the new compliance rules.  PC Charge Pro is a very good system (and what they're selling now is compliant with the new rules) and I liked it a lot, but before I spent the money on new software, I decided to see what was new in the market since I'd last looked. My husband suggested I look for merchant services apps for my smart phone (a Droid), which is what I went with.  First I'll tell you about a popular system we looked at and didn't choose, then I'll tell you about the one I signed up with (and am very happy with).

Of the merchant services that work with smart phones, Square (www.squareup.com) is one of the more popular ones.  Their fees are low and the card reader is cool, but there are problems with the way they do business that turned us off.  Any company that has no "real" office or phone number where you can talk to live people about problems is not a company I want to deal with, for one thing, and that's the case with Square.  Also, their reputation for customer service and complaint resolution is bad
(http://www.cardpaymentoptions.com/credit-card-processors/square-review/). The Ripoff Report website has an interesting complaint
(http://www.ripoffreport.com/internet-fraud/square-up/square-up-squareup-sqaure-\up-346db.htm) against Square too - it's always good to check these things when you're researching something that involves your money.  (Notice in the Ripoff Report the problem with taking sales over $1000 - many of my sales are over $1000 since I sell bronze, so that was a real turn-off for me.) 

A better solution, IMO, is www.MerchantWarehouse.com. They have free apps for Iphones, Androids, Blackberry and I believe Window phones too, and their rates are guaranteed to be the lowest (they will work with you on what the best rate is for your business). You can get a Bluetooth swipe machine to go with your
phone for $129, IIRC, which works great. However, if you're in a place like Equine Affaire where one company has the WiFi contract for the premises, you may have problems. At Equine Affaire in Ohio this April when I tried to use my Droid to do charges (it works great at home!) I couldn't get online with the
phone because of the WiFi service for the fairgrounds blocking my signal. I finally had to pay for the internet access and use my computer to use the free Merchant Gateway on MerchantWarehouse.com. So a really good aspect of the Merchant Warehouse system is that you're not locked into just using your phone - you have another option. BTW, when you input the customer's email address, a very professional-looking receipt is emailed to them, which is a really nice feature.

Periodically, Merchant Warehouse will go over your account and make sure you're still getting the best available rate, which is the first time that's been offered to me in the 16+ years I've been taking credit cards.

Merchant Warehouse has an A+ reputation with the BBB (Better Business Bureau). Whatever system you go with, be sure to check them out with the BBB and possibly Dunn & Bradstreet as well to make sure you're going with a reputable company and equipment. It's also a good idea to do searches for complaints against whatever company you're interested in, and whatever terminal you're interested in as well. I once was leased a terminal that the company KNEW would be obsolete in a year when AT&T changed their system!!!! There was no way for me to know that when I got it (because when I signed with them, I wasn't given the name and
model number of the swipe machine I'd be getting, so I couldn't research it - and honestly, it never occurred to me that it could become obsolete like that), but in researching our complaint against them, we discovered AT&T let those companies know that certain terminals wouldn't work anymore BEFORE this company leased this machine to me. What a pain.


Another good thing is that Merchant Warehouse gives its customers who refer people to them $100 if that person signs up. So if you do check them out and decide to go with them, please give them my name! :D I've already gotten paid for referring others to them, and they pay very quickly! You can also get a standard swipe machine type of system or software for your PC (although with the Merchant Gateway, I don't know why you'd need the software) with Merchant Warehouse if you prefer to work that way rather than with a smart phone.

I've been with 4 or 5 different merchant services companies since I've been in business. This Merchant Warehouse system is easy to use, easy to explain to others who might be working in your booth, inexpensive, secure and the people there are nice to do business with. I'm very happy with them, which is a very pleasant change from some of the ones I've had before!

Nanning and "Tolt" updates

Nanning is at the enlarger's in Oregon. The maquette has been scanned and is already at the foundry where the mold and castings will be made for the maquette edition as well as the life-size.  You can order a maquette now and it should be delivered hopefully by the end of October.  The maquette will be mounted on a shaped walnut base (not a rectangular one but one that follows the movement of the horse) and numbered sequentially.

These pictures were taken just before the piece was shipped.  For more information on this piece, please see its webpage, Nanning 374: Spirit of the Friesian.


Now that the piece has been scanned, the next step is to cut it out of Styrofoam at life-size.  To do this, the enlarging company uses a seven axis robotic arm.  The piece will be cut out in all three dimensions and will be 1/4" smaller all over than the finished size (17 hands at the withers).  A coating of the same kind of clay I use will be put on it and then I'll go out there to do the surface detailing.  I can't wait to see the enlargement!  I guarantee I'll get all misty-eyed.  This project is a dream come true for me!  I'm so excited about it!

"Tolt" is finished and gorgeous and now installed in its owner's home.  Here are the final pics of it.

Now I'm starting on a bust of Nanning that will be a bronze wall-hanging.  I'm eager to get started on it, and I'm REALLY eager to go to Oregon soon to do the final work on the Nanning life-size!  YIPPEE!!!!

Nanning nearing the end - WHEW!!

I'm busy detailing the mane, tail and feathers on Nanning, and I had to repair an ear today after I bumped it and messed it up, oh well.

Don't look at the feathers on the left hind - I've redone them many, many times and am still not settled on how I want to do those vertical feathers.  (He'd just stomped that food down in the photo, so they really are flying straight up.)  Those feathers, cleaning him up and smoothing out any remaining lumps are pretty much all that's left to do!!  YAY!

The piece is 15 1/2" long x 13 1/2" high at the top of the neck x 3 1/2" wide (just over 1/6 life-size).

Since this piece will be a life-size bronze and displayed outdoors, there are things to consider I don't normally have to think about.  For instance, I need to design him with as few "cupped" places as possible so they won't trap rainwater and create green spots on him.  Yes, the foundry will drill seep holes to drain any serious depressions, but still, if I can sculpt it so there are very few of them, that's best.  

"Tolt" has patina now and will be shipped to me soon!  I'll post pics of it as soon as it's mounted.

Updates on "Tolt" and "Nanning"

"Tolt" is in metal!  I got some "approval pics" from the foundry last week.  There are a couple of things I want them to fix (the reins should not be looped up above the rider's hands, and the stirrups are too far back on the feet), but overall, it's beautiful!! 

The maquette of Nanning is coming along well.  I've added hair to the tail and have started putting clay on for the mane, but the clay for the mane isn't "installed" yet.  It's just lying there on the surface in strands much too thick for the finished version because right now, I'm just working out the movement of the mane.  Once I've figured out how I want it to be, I'll thin those strands and make sure they're well-attached to the sculpture, as well as having mane on both sides of the neck..

I enjoy working on the "hairy" parts of horse sculptures.  That's where I can get more creative with it.  I think he's going to be gorgeous!!