All but the Signature . . . I hope!

I think "Tolt" is nearly finished.  I just have to clean up the clay, make the pads under the horse's feet more uniform in shape and sign the title, my name and copyright along the sides of those pads.  Then I have to clean all that up too.  (Signing sculptures is a pain - nowhere near as easy to do as signing a painting!) 

I've spent literally two to three weeks pondering and picking at and trying to sculpt the rider's hands until today when I finally got everything to work the way I wanted.  It's very hard to sculpt the part of the fingers and palm that are near the horse, so I finally turned the forearms and hands out away from the horse so I could see the inside shapes better.  There are suggestions of fingernails there and even my customer's gorgeous sapphire ring is shown as a general shape on her left hand.  Her arms and hands were hard for me to do - getting the muscling and the shapes of the parts right is quite a challenge, but I think everything's good now.

I like the way the wrinkles turned out in her shirt and breeches.  I textured her clothing to make it look different from her skin when it's bronze.  I think it will be a nice look to have that slight texture on the cloth.

The clay stirrups you see on the working surface won't be the ones used.  I made Super Sculpey ones so they'll be sturdier to ship (Super Sculpey is a polymer clay you can bake in the oven so it's hard, unlike plastilene which is always soft.)  The stirrups, stirrup leathers and reins will all be hand-made at the foundry for each piece, although they MAY be able to cast the stirrups.  I'm not sure if they're thick enough to cast well unless they use jewelry-type casting (centrifugal casting). 

Without further ado, here are the pictures!

The shape behind the hoof is supposed to be a splash of dirt.  I may change it a bit before declaring a victory on this piece.

When I saw this pic, I realized I need to add a browband.  I'll do that tomorrow.

  I'll be glad to get this one finished!  I've been working on it a long time, but I'm happy with how it's turned out.

Beginning of the end - I hope!

I'm getting close to finishing this piece, HUZZAH!  I just need to add a bridle on the horse and do the wrists and hands of the rider, thicken the tail a bit and make the rider's eyes match better - they're a tiny bit off.  Then I have to sign it and I'm finished!!

The horse's tail is nice and thick-looking from the back, but from the side, it isn't quite bushy enough.  Like most Icelandics, this mare has a really thick mane and tail.  I think the mane looks pretty good, but the tail needs to be thicker and needs more movement as seen from each side.  I'll work on that today.

The "splash" you see behind that right hind foot is necessary for support and strength for the piece.  In real life, that foot would be flying through the air like both left feet, but the horse needs more than one point of contact with the base in order to be strong enough to stand without bending the supporting leg.  The "splash" of dirt may be modified a bit, I don't know yet.  It's easy to sculpt them in relief, but doing them 3-D, it's a lot harder to get the look I want.

The stirrups are on the working surface (the board) in front of the piece in the photo above.  They won't be attached until the piece is in bronze because they are too delicate to cast properly.  They will be hand made for each sculpture, just as the bit rings, stirrup leathers and reins will be.  I think I'm going to remake the stirrups out of Super Sculpey so they'll ship more safely.

See how nice and thick her tail looks from behind?  I need to get that feeling from each side too.  Her ears barely show from all the flying forelock in real life.  I'm still trying to decide if I want to put more forelock on her to hide more of her ears or not.  What do you think?  I'm open to suggestions!

The rider's neck looks a bit rough because I haven't cleaned this sculpture up with chemicals yet.  When I finish, I'll use a small filbert paint brush and some orange cleaning liquid straight from the bottle (I'll squirt it into a small bowl I can dip the brush in) and paint the whole thing with the cleaning liquid.  That chemical will melt the surface of the clay just a tiny bit, smoothing out some places and getting rid of the crumbs as well.  I may still need to do some clean-up with tools after I use the chemical, but the chemical will show me where I need to do that.

She looks like my customer, which pleases me a lot since I haven't done a sculpture of someone with an open smile before.  Every picture I have of her, she's got a happy smile on her face, so that's what I used.

I have stirrup leathers on the inside of the rider's legs, cut off at the point where they would not be against hte leg in real life as they stretch to support the stirrups.  The foundry will add flattened copper wire the width of the leathers I've started when they put the stirrups on.

If you have questions or comments, feel free to write me!  Thanks for your interest.

Ahhh, that's better . . . "Tolt" and "Star Sons 2" news!!

I finally saw what was bothering me about the rider's face.  I knew something was a bit off, but I couldn't quite figure out how to fix it.  Then I saw it.  The eyes were set too high (by about 1/16th of an inch), and the place where the nose dips in toward the eyes was set in the wrong place (by an even smaller margin).  So today I put dabs of clay in the places where the eyes were, smoothed that out and started over - not my favorite thing to do, especially on something as delicate and difficult to create as the eyes on this rider.  But I did it, and revised the shape of her cheekbones somewhat, her temples and browbone, the nose, and even brought the brim of the helmet lower and trimmed some off the top of the helmet.  I like it a lot better now.  I think I need to broaden the lower cheeks and jaw just a tiny bit on each side, and then it just might look like my customer!  YAY!  Here are some pictures to show what I accomplished today.

I know her helmet still needs straps, but I'm not going to add them until I'm satisfied with her face.

As you may be able to see from the pictures above, and will certainly see in the picture below, I also started working on the mane, getting the masses of the flying mane and forelock somewhat defined on one side, as well as filling in holes and undercuts so it will cast well.

I think this will be a beautiful piece!  I'm excited to see it coming together so well!

In other news, I've finished the revisions on my second "Star Sons" novel (titled "The Gathering Alliance") and am printing it out right now for a final read-through to make sure I haven't missed anything in proofreading.  The cover art is finished and there are only a few details to complete before it will be ready for publication.  HUZZAH!!!  I'll post ordering info here and on Facebook and my Yahoo groups when it's ready to go.  It will be available from me as well as from Amazon.com, BN.com and various other outlets. You will also be able to order it in your local bookstore with its ISBN number.  I'm excited to have this finished!  YAAAY!!

Details, details, details . . .

Now I'm at the point of building the saddle on the horse and making sure it fits the rider.  The rider is nowhere near perfect yet, but she's about as thick as she's going to be front to back (this is a petite middle-aged rider).  I  may need to adjust the length of her legs once I get back to work on her, but for now, I'm just getting the saddle assembled and placed where it should be.  I know I need to get her body more proportionate and to get her sitting on her seat bones.  I'll get there eventually.

At first, I had the saddle a bit long for this rider - If you look carefully, you should be able to see I've just cut the clay at the back of the cantle so it fits the rider better.  I've just turned a bit of clay over to fill in some of the seat behind her, actually, and then put a cut behind the cantle as a marker for when I get back to work on it.

You can also see I've put feathers on three of the legs now, and those legs have also developed muscles, bones and tendons.  I've put a bit of clay on the neck as well, starting to plan out the movement of the mane.  The strips of clay ahead of where the saddle's knee rolls should be in the picture below are just extra pieces I haven't trimmed off yet.  I've only developed the saddle on the left side and a bit on top.  The right side will be done tomorrow.

Here are some detail shots of the horse and rider. 

Don't worry, her ankles and feet will be straight with no wire sticking out of them when I get finished.  For now, this is very much a work in progress.  The knee rolls are just being developed and will be shaped better before I declare a victory over them.

I'm pretty pleased with how it's coming along.  Hope you enjoy seeing its progress!